I was wondering wha others have been able to haul with their Sweptline... I just hauled 2 pallets of clinker brick... a little over 1,000 bricks. The clinkers weigh about 7 lbs each. A 7,000 pound load in the bed. Fortunately I didn't have to go very far, about 15 miles. One guy with a Tundra wasn't able to haul even 1 pallet. He bottomed out when the forklift lowered the pallet onto his bed. Then something made a very unplesant noise and they quickly removed the pallet. Another guy had an F250 and took a pallet and his bed came down quite a bit but he was able to do it. I took 2 pallets, lowered quite a bit also but the truck did it. Check out the pics... Truck drove fine...







--------------------------
66 W200, 440/727, almost back together, restored!.
68 Galaxie 390
70 W200, 392, NV4500, d60f, d70r, hydraulic clutch, p/s, hydroboost, HD factory gauges
70 F250, 6BT, NV4500, d60f, d70r, hydraulic clutch, p/s, hydroboost, A/C
70 Olds Cutlass 455 Convertible, A/C, pw, discs, console
86 Jeep Comanche 4.0, auto, 4x4
91 Ford Ranger shop truck
99 Cadillac Seville
12 Jeep SRT8



Edited 1 time(s). Last edit at 02/22/2016 01:58PM by frankyb.