1961-71 Dodge Sweptline Truck Forum

Sweptline Showcase

Sponsored Links

I noticed a broken motor mount on the passenger side of my W200. I have a 318 Poly under there. I've been told that Mopar motor mounts really suck and I should consider either polyurethane or interlocking mounts. I think I prefer the interlockers as the polyurethane might make it vibrate too m 
avatar
Re: need motor mounts
Posted by: MoparNorm (Moderator)
Posts: 1,441
Date: June 06, 2009 09:24AM

Frank,
Since your truck originally had a 318LA, the original 318LA mounts were in questionable condition, one was broken.
We installed new 318LA mounts, in the same location.
Obviously, your Poly has WAY more torque than the 318LA. so that may be why the new mounts failed.
One concern with installing Poly type mounts is that the engine/driveline geometry will change as Poly mounts will raise the motor about 1.5".
We might need to fab something stronger for the Hollister Mud Pit Champion.....= )


Navigate: Previous MessageNext Message
Options: ReplyQuote


Subject Views Written By Posted
need motor mounts 1403 frankyb 06/04/2009 10:23PM
Re: need motor mounts 475 DODGEBOYS 06/05/2009 10:20AM
Re: need motor mounts 493 JimmieD 06/06/2009 02:08AM
Re: need motor mounts 469 frankyb 06/06/2009 02:38AM
Re: need motor mounts 501 MoparNorm 06/06/2009 09:24AM
Re: need motor mounts 515 frankyb 06/06/2009 11:32AM
Re: need motor mounts 564 dspeed 06/06/2009 12:02PM
Re: need motor mounts 489 MoparNorm 06/07/2009 08:20AM
Re: need motor mounts 508 JimmieD 06/06/2009 01:18PM
Re: need motor mounts 478 Hobcobble 06/07/2009 09:00AM
Re: need motor mounts 509 JimmieD 06/07/2009 11:15AM
Re: need motor mounts 691 SUPRDUD 06/11/2009 11:17PM


Array
Sorry, only registered users may post in this forum.
This forum powered by Phorum.