1961-71 Dodge Sweptline Truck Forum

Sweptline Showcase

Sponsored Links

I have a 1971 D300 dually with a 4 speed trans. I believe it to be a NP 435. However, when trying to order a kt to install a GearVendor overdrive i have from a later Dodge with a 5 speed, the guys at GearVendor wanted to know which 435 I have. They told me to measure the distance between the two to 
avatar
Re: NP 435 trans
Posted by: swptln (Moderator)
Posts: 963
Date: October 11, 2018 07:11PM

The 63-68 NP435 used a 1" x 10 spline input shaft, straight roller ball bearings on the input shaft.
The 69-71 used the 1" x 23 spline input, tapered roller bearings on the input shaft.
63-71 used a 1 1/4" x 23 spline output shaft, 63-68 used a 1410 joint yoke and the 69-71 used a 1310 joint yoke.
To my knowledge the only difference is what I listed, aside from the wide and close ratio options, other than that they were both pretty much the same as far as bolt patterns front and rear.

Mark D.

1968 W200 Sweptline
1969 D100 Utiline
1971 D100 SE Sweptline
1993 D250 Club Cab Sweptline
1986 W250 Cab & Chassis
1978 D300 Sweptline

E. Brookfield, Massachusetts

Navigate: Previous MessageNext Message
Options: ReplyQuote


Subject Views Written By Posted
NP 435 trans 1131 Rickers 10/04/2018 07:51PM
Re: NP 435 trans 391 712edf 10/06/2018 03:06PM
Re: NP 435 trans 436 Rickers 10/07/2018 06:20AM
Re: NP 435 trans 555 712edf 10/07/2018 12:01PM
Re: NP 435 trans 297 Rickers 10/07/2018 07:57PM
Re: NP 435 trans 400 PwrWgnDrvr 10/08/2018 02:22PM
Re: NP 435 trans 291 Rickers 10/08/2018 07:49PM
Re: NP 435 trans 305 Klebert L. Hall 10/10/2018 11:14AM
Re: NP 435 trans 296 Klebert L. Hall 10/10/2018 09:17PM
Re: NP 435 trans 508 swptln 10/11/2018 07:11PM
Re: NP 435 trans 333 Rickers 10/12/2018 08:08PM
Re: NP 435 trans 309 PwrWgnDrvr 10/13/2018 09:58AM
Re: NP 435 trans 301 Kaegi 10/13/2018 10:33AM
Re: NP 435 trans 310 Klebert L. Hall 10/13/2018 12:52PM
Re: NP 435 trans 332 PwrWgnDrvr 10/13/2018 10:07PM
Re: NP 435 trans 590 Klebert L. Hall 10/14/2018 04:36PM


Array
Sorry, only registered users may post in this forum.
This forum powered by Phorum.