something don't seam right as the same box on the d200 with larger tires
Forum: Dodge Sweptline Truck General Discussion

Cool truck I like It!!!
Forum: Dodge Sweptline Truck General Discussion

Great snag while looking tru my shed I also found a set of adjustable rocker arms I didn't even know I had.Running a hot cam is nice to set the preload on the hydraulic rockers on my 70 383 I used shims but there kinda hokey but works.
Forum: Dodge Sweptline Truck General Discussion

On the cummins diesel in equipment they use a starter solenoid to fire up the starter simple add on.
Forum: Dodge Sweptline Truck General Discussion

Maybe you should list them sometimes you see something listed you wasn't thinking about.I have a 66 d200 im going to start on slant six converting to 383 with the 4 speed I need a inspection cover for bellhousing
Forum: Dodge Sweptline Truck General Discussion

Not sure anyone posted this but check it out.
Forum: Dodge Sweptline Truck General Discussion

The camper special springs are twice as thick as the stock 5 leaf the second leaf is as long as the first with out the eyes so the top two springs act like one thick one which is almost 4 times as thick as the top leaf on a d100.They dont wrap no wheel hop,Been using them since 1978 on my Adventure D 100 The only draw back is it rides like a d200
Forum: Dodge Sweptline Truck General Discussion

On my pink dodge it has camper special springs from a 1969 d200.What has to be done is drill the perch out to 9/16 easy to do i was lucky enough to find a set with the hardware and shackles.The other issue is the rear axle from a d200 is longer in the pinion so it will move your rear axle back a inch had to get a longer drive shaft.I ran it for awhile but wore out my tail shaft bushing.The reason
Forum: Dodge Sweptline Truck General Discussion

The clutch was a 12 inch i also found two starters here in town both rebuilt one is 135 the other is 150 bought outright with no core charge.going to pick one up next week all i need is the clutch inspetion cover took me 4 mouths to find what i found so far.I also found some short center dump headers should fit like a glove.
Forum: Dodge Sweptline Truck General Discussion

Wont do it if you want it buy a lifestyle truck.Cant see a coil or air bag on a sweptline like trying to put it on a powerwagon a big no no !!Leaf spring straightaxles its a truck not a car No plastic trucks LOL
Forum: Dodge Sweptline Truck General Discussion

sure thats not off a 1959 desoto?
Forum: Dodge Sweptline Truck General Discussion

Are you interested in the slant six ?I did rotate and count the turns in fact it does have the granny low the next thing is do you know the size of the out put shaft for the yoke i really dont want to pull the drive line yet just trying to figure out if i need any more parts for the swap out.
Forum: Dodge Sweptline Truck General Discussion

I had a 1970 adventure blue with white truck adventurer 383 auto ps pb had all the trim it rusted out so i found a 1971 from texas it was white and had the rare middle trim.I had most of the trim from the adventurer but wasnt perfect so i just picked tru and used some of it.I decided to not use the side trim.The truck had a 318 auto no power options.I transplated most of the 383 auto ps pb the te
Forum: Dodge Sweptline Truck General Discussion

Heres what i got going im putting a 383 in my 1966 D200 with hydraulic bellhousing.The tranny in the truck says its a 4 syn np 435 i believe it has the 4 to 1 gear for first.The other tranny i have is out of a D500 which has the 6 to 1 first gear it also has the 1 3/8 input shaft with 10 spline.It also has a pto mounted on it.Im leaning on the D500 tranny it looks to have the larger u joint and h
Forum: Dodge Sweptline Truck General Discussion

Its a 30 spline there was a posi on ebay it went for 115 plus 30 shipped there was a proxi bid it i didnt have any more money for bidding.
Forum: Dodge Sweptline Truck General Discussion

I would of spent two hundred more for a smaller distributor that doesnt look good on there
Forum: Dodge Sweptline Truck General Discussion

Funny how i found the picture but after i bought the setup i got was trying to figure out the part number and ran across the picture looks just like the setup i bought.Boy those are hard to find yet a complete setup.You guys are great helping out was going to give up on the 383 and use the poly 318-3 going to pull the poly from the tranny its suppose to have a 12 inch clutch being it was from a d
Forum: Dodge Sweptline Truck General Discussion

Thanks John i bought one like the picture but its missing the bottom cover
Forum: Dodge Sweptline Truck General Discussion

I found this picture on the internet is this the correct one for a 1966?pat number on bell looks like a 0-93961-w
Forum: Dodge Sweptline Truck General Discussion

Ok i picked up the bellhousing flywheel clutch pressure plate throw out arm bearing and slave cylinder.The inspection cover is missing so i need to find one of those unless one from a smaller motor will fit.Looked 4 months for one and 150 miles away the parts were to be had one step closer the boot needs replaced on the throw bearing arm also.
Forum: Dodge Sweptline Truck General Discussion

I will just pull an axle to be sure
Forum: Dodge Sweptline Truck General Discussion

Was just checking here before i have to pull a axle out to count the splines Storm here snow and blowing
Forum: Dodge Sweptline Truck General Discussion

Never seen one like that cool stuff how fast will these trucks go?
Forum: Dodge Sweptline Truck General Discussion

You can hammer me down.I read tru all the post and probably drank too many beers.Read right over it.Buying the new nose cone is a good theory if it comes to that
Forum: Dodge Sweptline Truck General Discussion

Ok i got a 1966 318 poly out of a D500 is that the same starter?
Forum: Dodge Sweptline Truck General Discussion

I have located everything but a starter my question is the starter only fits this application or does it fit others?
Forum: Dodge Sweptline Truck General Discussion

It shows a special flywheel and a starter to match it.I have the correct part numbers thanks for the help
Forum: Dodge Sweptline Truck General Discussion

Love the short beds real nice truck!!
Forum: Dodge Sweptline Truck General Discussion

I found the part numbers on the sweptline.org now to find the parts
Forum: Dodge Sweptline Truck General Discussion

66 or 67? i love them old extra traction sure grips on the rear my first 68 had them on the rear they would really dig!!
Forum: Dodge Sweptline Truck General Discussion