Seems I have a small exhaust leak in the crossover, when I originally took off the intake there was only the pressed tin gasket. When I took it back apart, the dopes at napa convinced me that I needed 2 of the paper type per side one top and one on the bottom of the tin one.
These paper ones are thin and sit between the head and intake about a foot long and about an inch and a half tall.
I put all 5 gaskets in, intake was hard to get the bolts aligned, but not bad.
Do both? One? Or none need to be there?
Oh and another thing my dome light fixed itself, goes to show procrastination is king.
The dome light would not turn on with either door open or from the head light switch. I got it to come on and flash, with the combination of the key "on", hazard switch "on",turn signal(up or down)and brake being applied.
Now I have a schematic in my head on how hat truck is wired and there was no way that could ever happen, but it did.