1961-71 Dodge Sweptline Truck Forum

Sweptline Showcase

Sponsored Links

Guys, With the new engine going into my truck I want to convert over to electronic ignition. My wire harness is old, brittle, and looks bad. I dont want to salvage it, just buy new. Who do you recommend to use for a custom new harness that is set up for electonic ignition. Thanks fish 
avatar
Re: engine wire harness upgrade question
Posted by: JimmieD (66.81.28.---)
Posts: 1,090
Date: November 24, 2010 05:39PM

I loved my MSD 6 until I blew it up, but another vote here for Mopar Electronic! With super good grounds it's reliable as a chunk of pig iron and plenty of fire up to 7,000 for sure.

MSD blew because the old MSD instruction sheets never mentioned having to remove the ballast resistor! Noticeably stronger and much faster starting with MSD though.

Another thing: I sure was happy with the starting when I upgraded to about 1/0 [1 aught] wire for the starter, running via relay for full battery voltage. Wire used for MIG ground cable works GREAT! Never had to replace that starter. The heavier circuit running from alternator to battery really helps charge current a bunch too, like at least 6 ga. there.

I also prefer to set up my lights and heavy current draw stuff on relays; quick, cheap & easy, just like those girls I used to run with...

Navigate: Previous MessageNext Message
Options: ReplyQuote


Subject Views Written By Posted
engine wire harness upgrade question 1083 68 Fish 11/20/2010 08:35AM
Re: engine wire harness upgrade question 528 JimmieD 11/20/2010 12:03PM
Re: engine wire harness upgrade question 598 ben 11/20/2010 07:13PM
Re: engine wire harness upgrade question 450 68 Fish 11/21/2010 06:28AM
Re: engine wire harness upgrade question 461 ben 11/22/2010 02:15PM
Re: engine wire harness upgrade question 523 68 Fish 11/22/2010 08:13PM
Re: engine wire harness upgrade question 453 wally426ci 11/24/2010 06:04AM
Re: engine wire harness upgrade question 447 JimmieD 11/24/2010 05:39PM
Re: engine wire harness upgrade question 493 68 Fish 11/28/2010 06:28PM
Re: engine wire harness upgrade question 591 PwrWgnDrvr 11/28/2010 07:37PM
Re: engine wire harness upgrade question 467 MoparNorm 11/28/2010 10:56PM
Re: Terry 471 ben 11/30/2010 12:24PM
Re: Ben 407 PwrWgnDrvr 11/30/2010 08:15PM
Re: Correct 477 ben 12/04/2010 09:00AM
Re: engine wire harness upgrade question 484 Russ 12/04/2010 08:44AM
Re: engine wire harness upgrade question 493 Russ Roth 12/11/2010 10:52AM


Array
Sorry, only registered users may post in this forum.
This forum powered by Phorum.