1961-71 Dodge Sweptline Truck Forum
Sweptline Showcase
Sponsored Links
I have a 66 W300. The truck sat for a long time before coming back to life. The motor was running fine, but with a noisey lifter. Now it starts and idles but when you step on the gas it bogs, sometimes spits in the carb or the exhaust. New plugs points wires cap roter and adjustments are good. Oil
DTA Home•
Photo Albums•
Archives•
Best of Forum•
Poly Headers Buy•
Jim's CD•
Easy-Street Parts•
Power Wagon Gear
Re: Valve Lifters in 318 Poly
Posted by:
Hobcobble
(74.110.24.---)
Posts: 582
Posts: 582
Date: June 27, 2013 09:04PM
If the truck's engine is original to it, you should have
solid lifters in it. If the truck sat for a long time, your
accelerator pump might be shriveled up. You can buy one
from your local NAPA for a couple bucks. You might also need
to set the valve lash on the engine and fine tune the dwell
and timing too.
John
solid lifters in it. If the truck sat for a long time, your
accelerator pump might be shriveled up. You can buy one
from your local NAPA for a couple bucks. You might also need
to set the valve lash on the engine and fine tune the dwell
and timing too.
John
| Subject | Views | Written By | Posted |
|---|---|---|---|
Valve Lifters in 318 Poly
|
1820 | njjim | 06/27/2013 06:27PM |
|
Re: Valve Lifters in 318 Poly
|
658 | Hobcobble | 06/27/2013 09:04PM |
|
Re: Valve Lifters in 318 Poly
|
549 | njjim | 06/28/2013 08:40AM |
|
Re: Valve Lifters in 318 Poly
|
613 | txas2step | 06/28/2013 09:14AM |
|
Re: Valve Lifters in 318 Poly
|
896 | Kaegi | 07/25/2013 11:31AM |
|
Re: Valve Lifters in 318 Poly
|
527 | PwrWgnDrvr | 06/28/2013 01:37PM |
|
Re: Valve Lifters in 318 Poly
|
525 | njjim | 06/29/2013 09:23AM |
|
Re: Valve Lifters in 318 Poly
|
558 | txas2step | 06/30/2013 08:18AM |
|
Re: Valve Lifters in 318 Poly
|
530 | Kaegi | 06/30/2013 11:05AM |
|
Re: Valve Lifters in 318 Poly
|
539 | JimmieD | 07/01/2013 09:53PM |
|
Re: Valve Lifters in 318 Poly
|
556 | njjim | 07/02/2013 10:01AM |
|
Re: Valve Lifters in 318 Poly
|
528 | Kaegi | 07/03/2013 03:00PM |
|
Re: Valve Lifters in 318 Poly
|
485 | txas2step | 07/02/2013 10:48AM |