James,
If you require a PTO that offers both forward and reverse, then your part numbers would be as follows:
RL6D-U6813-L1BX PTO w/ 1.25 inch diameter output shaft, eye bolt for lever shift, shaft to the front of the truck, PTO output percentage will be 33% of engine speed and 27% of engine speed
40TA0810 geared adapter
23M60093S spacer
23M60200S spacer
20MK6602 stud kit
If your winch has provisions for direction change and you only need input in one direction, then your part numbers would be as follows:
TG6S-U6818-C1BX PTO w/ 1.25 inch diameter output shaft, cable shift including cable, shaft to the front of the truck, PTO output percentage will be 40% of engine speed.
40TA0810 geared adapter
23M60093S spacer
20MK6602 stud kit.
Please check the installation manual carefully, when installing a PTO with adapter, the proper backlash has to be set between the PTO and the adapter as well as between the adapter and the transmission.
Our closest distributors in Texas include:
Truckers Equipment, Inc.
Corpus Christi, TX 800-242-3277 361-882-2508
San Antonio Brake & Clutch
San Antonio, TX 800-226-0254 210-226-7693
Additional distributors can be found at: [
www.munciepower.com]
Thanks again,
Gordon McIlwain
G. McIlwain
gmcilwain@munciepower.com
Muncie Power Products, Inc.