1961-71 Dodge Sweptline Truck Forum
Sweptline Showcase
Sponsored Links
Almost ever since I've owned my 1968W200 (since 82), the clutch master cylinder has been finicky. What I mean by this, is if I drive my truck in stop and go traffic where I'm constantly shifting after awhile the clutch pedal will suck up air and get a spongy feeling. I've noticed tha
DTA Home•
Photo Albums•
Archives•
Best of Forum•
Poly Headers Buy•
Jim's CD•
Easy-Street Parts•
Power Wagon Gear
Re: finicky hydraulic clutch master cylinder
Posted by:
mike m
(67.150.213.---)
Posts: 16
Posts: 16
Date: August 23, 2009 11:19PM
Trey,
Thanks for the advice. When done in the past, I've followed what the shop manual says are far as free play adjustment etc. in slave cylinder and pedal. As I recall, the slave should have around 3/16 free play in the push rod with spring off and pedal is 1" as you have stated. Thanks for the tip on cleaning out the line.
Mm
Thanks for the advice. When done in the past, I've followed what the shop manual says are far as free play adjustment etc. in slave cylinder and pedal. As I recall, the slave should have around 3/16 free play in the push rod with spring off and pedal is 1" as you have stated. Thanks for the tip on cleaning out the line.
Mm
