1961-71 Dodge Sweptline Truck Forum
Sweptline Showcase
Sponsored Links
I'm getting close to firing up an A318 Poly that I put in my '68 D100. As I'm using a '70 cab, I'm also then using the later wiring harness. The alternator is original equipment to the Poly ['66 vintage] and is a single field. My wiring has what I'm assuming to be
DTA Home•
Photo Albums•
Archives•
Best of Forum•
Poly Headers Buy•
Jim's CD•
Easy-Street Parts•
Power Wagon Gear
Re: Alternator Question....
Posted by:
Hobcobble
(69.95.231.---)
Posts: 582
Posts: 582
Date: August 25, 2009 09:48AM
Yep...Quote
PwrWgnDrvr
Red wire from #19 feeds power to the ballast resistor from the ign switch.
What I'm trying to do now is identify the orange wire that is
"paired" with the red ignition wire. Both the red and orange
wires run to a the female [factory] plug on the ignition side
of the ballast resistor. The orange wire is the one not shown
in the wiring diagram for '70 or '71 from the Sweptline.com
archive. This is the wire I'm needing to confirm as going to
one of the alternator field terminals.
Additionally, these diagrams show the reverse light switch for a
manual tranny. I have an automatic tranny and the "third"
[dk green] wire runs to the starter relay. This is not shown
in the diagram I have been referring to. Before I buy a copy
of the '70/'71 FSM from Bishko.... can someone confirm that it
does picture these wires?
John
Edited 1 time(s). Last edit at 08/25/2009 10:03AM by Hobcobble.
